Home All Products (17)
ROLLER BEARING ‘V’ BLOCK
Used for checking heavy and odd shaped round jobs.
Perfectly matched pair having accuracy 0.005 mm
Included angle of rollers is 90°
Standard bearings are used which are replaceable
Jobs don’t get damaged due to bearing on top
SPECIFICATIONS:
Cat No. Sizes mm. Range mm. Load
Lx W x H Capacity Kg
SH - 888 150 x 60 x 100 Æ3 - Æ 55 1,000
SPECIAL SIZES ARE AVAIBLE ON REQUEST
ROLLER BEARING ‘V’ BLOCK
MAGNETIC VICE KM - 730, KM - 739
The "Kumaun" Magnetic Vice ensures a distortion free use. This Vice assures the square holding of the component and thus the set up time is minimized.
SPECIAL FEATURES:
Flatness, Square ness, & Parallelism - 0.005 mm
Permanent powerful magnet with ON – OFF switch
All surfaces are precision ground
Vertical 'v’ in movable jaw
SPECIFICATIONS:
CAT. NO. SIZE
KM - 730 150 * 115 * 75
KM - 739 200 * 125 * 85
MAGNETIC VICE
SRD – 97
Medium duty rectangular shape magnetic base with powerful magnetic pull and a quick release lever with ‘V ‘ shape at the bottom facilitate easy mounting on a machine tool or work surface. Exclusive fingertip release tilts unit away from work for easy removal.
SPECIFICATIONS:
BASE – 1.1 / 8” * 1.1 / 8” * 3. 3 / 4”
COLUMN – 5 / 1 6” DIA 4” LENGTH
MAGNETIC PULL – 30 KG
Supplied with two rods, one to hold standard dial gauges and dial test indicators 1 / 4 “ in diameter and other multi step rod 1 / 4 “ dia with 5 / 6: O.D. at one end and 7 / 32 “ O.D. at the other end for use with standard machine shop clamps.
SRD – 98
Similar to SRD – 97 but having Fine Adjustment to facilitate rapid setting of indicator dials at a desired position.
SPECIAL BALL JOINT BASES: SRD – 97 B & SRD – 98 B
Dimensions are same as SRD – 97 and SRD – 98. But the pillar is provided with Bolt and Socket Joint Action.
ALRGE MAGNETIC BASE
V– BLOCK HARDENED (UNIVERSAL) (with clamp) SH - 447
Hardened and ground on all working surfaces to an accuracy within 0.005 mm.
SPECIFICATIONS:
CAT NO. SH - 447
CLAMPING RANGE 5 - 50 mm
L*W*H 70 * 50 * 60 mm
V- BLOCK HARDENED (UNIVERSAL) (with clamp)
KM – 401, KM – 402, KM – 403, KM – 404, KM – 405
Steel case hardened. Ends of jaws chamfered to facilitate clamping under shoulder or in recess. Clip holds loose jaw in position when clamp screw is released.
SPECIFICATIONS:
CAT.NO. LENGTH OF JAW OPENING
401 1.5” (38 mm) 5/8” (17 mm)
402 2” (51 mm) 1” (25 mm)
403 3” (75 mm) 1.5/8” (41 mm)
404 4” (102 mm) 2.5” (64 mm)
405 5” (127mm) 3.5” (89 mm)
TOOLMAKERS PARALLEL CLAMP
MRM – 700, MRM – 900
These blocks are designed to hold the steel components in desired fixed position during welding marking grinding etc. These are extremely useful in Tool – Room in the assembling of jigs and fixtures and are also utilized with Sine table for inspection of components. They are also used a magnetic parallels as the pair are matched with +/- 5 micron. In bigger sizes an ON – OFF switch is also provided.
SPECIFICATIONS:
TYPE SIZE
MRM – 700 100 * 70 * 70 MM
MRM - 900 150 * 80 * 80 MM
The MRM – 700 H and MRM- 900 H are also available. These have the same specifications as the MRM 700 and the MM 900 but the additional lining of hardened steel plates ensures the extra wear resistibility
MAGNETIC SQUARE BLOCK
SRD – 95
Small bodied square in shape magnetic base with a “ V “ which permits use on round or flat therefore can easily be mounted on machine tools or work surfaces, with greater magnetic pull and quickly released by a simple leverage
SPECIFICATIONS:
BASE – 1.1/ 4” * 1.1 / 4 * 1.5 / 16”
COLUMN – 5 /16” Dia * 4” Height
MAGNETIC PULL - 25 kg (50 lbs.)
Supplied with two rods namely, one for standard dial gauges and dial test indictors and other for standard. Machine shop clamps with a step of 5 / 16 “& 7 / 32 “at the ends.
SRD – 96
Similar to SRD – 95 but it is having Fine Adjustment for rapid setting indicators to desired readings.
SPECIAL BALL JOINT BASE: SRD – 95 & SRD – 96B
Dimensions are same as SRD – 95 & SRD – 96. But the pillar is provided with Bolt & Socket Joint Action.
SMALL MAGNETIC BASE
This extra heavy and ruggedly made universal testing stand is used wherever the highest accuracy is required in using a comparator. It can be used in many different ways; on the surface plate in testing parallel surfaces of work pieces on machine tools for setting up pieces to be machined with reference to already existing surfaces or for inspecting mounted pieces for run-out etc.
The surfaces of the H-formed base, the column and the extension arm are high precision ground. The column can be moved and clamped in any position of the base with a knurled nut.
The extension arm, which can be adjusted in height moved lengthwise and swiveled is sufficiently rigid that vibrates during the measurement even with the fullest extension are at a minimum.
The base of the indicator stand is made of steel or cast iron.
SPECIFICATIONS:
KM - 301
HEIGHT OF COLUMN
300 mm 500mm800m
MAXIMUM
HORIZONTAL
EXTENSION 350 mm 350 mm 350 mm
LENGTH OF BASE 300 mm 300 mm 300 mm
WIDTH OF BASE 100 mm 100 mm 100 mm
DIAMETER OF COLUMN 40 mm 40 mm 40 mm
EXTENSION ARM 25 mm 25 mm 25 mm
HEAVY DUTY DIAL INDICATOR STAND
RH – AM
RH – BH
CH – CM
DTH – M
KJH – D
RH – B
CH – C
DTH
Rectangular Holder type AM 8 mm*4.8 mm pin diameter 4 mm.
Rectangular Holder Type BM 13 mm*6mm, pin diameter 4 mm.
Cylinder Holder Type CM 9.5 mm diameter, pin diameter 4 mm.
Swivel Clamp with Dovetail Holder (Metric models) Bore diameter 4 – 9.5 mm.
Knuckle Joint Holder (Dovetail).
Rectangular Holder Type A 5 / 16 “ * 3 / 16,pin diameter 1 / 4 “
Cylindrical Holder Type C 3 / 8 “ diameter pin diameter 1 / 4 “.
Swivel Clamp with Dovetail Holder (Inch models) Bore diameter 1/4–3/8 ”.
COMPLETE SET SPECIFICATIONS CONSISTS OF
Tool post holder 9.5 * 19 * 150
Upright spindle 8 dial * 115 L
Universal Clamp 6.5 and 8 holes
G – Clamp 33 capacity round or flat
Extra contact points With Domed Anvil and Round Anvil Tommy bar. Hole attachment with indicator Mounting hole and swivel Arm 9.5 hole for dial indicator.
TYPE READING TRAVEL GRADUATION
40 mm 787-1 0.001 mm 3.5 mm 0-50-0
Black 787-2 0.001 mm 3.5 mm 0-100
Plunger
Type 787-3 0.001 inch 0.14 inch 0-25-0
Dial
Gauges 787-4 0.001inch 0.14 inch 0-50
LEVER TYPE DIAL INDICATOR