Home All Products (17)
HARDENED VEE BLOCKS SH- 455, SH- 456
These hardened vee blocks come with these special inbuilt features:
‘V’ blocks are hardened and ground to 60+2 HRC
Precision ‘V’ Blocks for Tool Room, Inspection Work, Assembly Shop, Marking
All sides precision ground, parallel and square
‘V’ groove ground central and parallel 2 sides and base perfect aligned in matched pair
Supplied with special clamp for holding job
Hold square and round work
SPECIFICATIONS:
Cat No. Size Range
SH- 455 [4”v-b] 175 * 100 * 65 mm 5-125 mm
HARDENED VEE BLOCKS
The V – Blocks have two V – angles of different size to take parts of varying dimensions. By means of the clamp the Work can be held tight in the block. The accuracy of the vee block/100mm is within 0.005 mm.
SPECIFICATIONS:
CAT NO. L * W * H CLAMPING RANGE
SH-444 050 * 040 * 040mm 05-30 mm
SH-445 075 * 060 * 060mm 06-50 mm
SH-446 100 * 080 * 080mm 06-70 mm
SH-448 070 * 140 * 140mm 10-125mm
SH-449 150 * 200 * 200mm 10-150mm
SH-450 200 * 200 * 200mm 10-200mm
V–BLOCKS CAN BE SUPPLIED WITH 120 DEGREE ANGLE.
V - BLOCK HARDENED (with clamp)
Universal Surface Gauge has many desirable features and is designed for wide range of uses, which are supplied in four sizes. The base is made from case hardened steel, ground on bottom and at one end. The Fine adjustment feature makes it possible to obtain quick and accurate settings. This adjustment is made by a knurled thumbscrew, which is located at the end of the rocker. The rocker runs the 2/3 the length of the base and pivots against a stiff spring located at the rear end of the base
SPECIFICATIONS:
KM – 900 KM – 901 KM – 902 KM – 903
HEIGHT 185 mm 300 mm 450 mm 600 mm
BASE
LENGTH 55 mm 80 mm 100 mm 110 mm
AND
WIDTH 45 mm 65 mm 85 mm 90 mm
Additional pillar of 4”, 9”, 12”, and 18” can be supplied
on demand to respective cat nos
UNIVERSAL SURFACE GAUGE
These Boring tool devices are used to set boring tool to the exact diameter on boring machines and machine tools with rotation boring tools. Because of their magnetic bases, they can be held directly on boring spindle. The clamps can fit at any desired position whereby any particular bore size can be set on the device. These devices have ON / OFF switches, as per requirements and aid in holding the job on boring spindle. The ‘ V ‘ slot is ground to 5micron accuracy.
SPECIFICATIONS:
CAT. NO. SIZE [L W H] CLAMPING RANGE DIA. IN MM
[Without ON / OFF switch]
KM - BSD - 201 70 * 22 * 40 mm 10 TO 60
KM - BSD - 202 75 * 22 * 50 mm 10 TO 85
[With ON / OFF switch]
KM - BSD - 203 50 * 28 * 60 mm 10 TO 50
KM - BSD - 204 60 * 30 * 60 mm 10 TO 60
KM - BSD - 205 65 * 35 * 60 mm 10 TO 70
KM - BSD - 206 75 * 35 * 70 mm 10 TO 90
KM - BSD - 207 70 * 40 * 60 mm 15 TO 105
KM - BSD - 208 90 * 40 * 70 mm 15 TO 120
KM - BSD - 209 120 * 40 * 90 mm 15 TO 150
MAGNETIC V - BLOCK SPECIAL FOR BORING BAR
MRM – 700H, MRM – 900H
These blocks are designed to hold the steel components in desired fixed position during welding marking grinding etc. These are extremely useful in Tool – Room in the assembling of jigs and fixtures and are also utilized with Sine table for inspection of components. They are also used a magnetic parallels as the pair are matched with +/- 5 micron. In bigger sizes an ON – OFF switch is also provided.
SPECIFICATIONS:
TYPE SIZE
MRM - 700H 100 * 70 * 70 MM
MRM - 900H 150 * 80 * 80 MM
MAGNETIC SQUARE BLOCK [IN PAIR]
ROUND MAGNETIC BASE STAND SRD – 100
This is a compact universal permanent magnetic stand. It’s medium size and exceptional magnetic pull makes easy application of dial test indicator and dial inductor to machine tools for the purpose of setting and checking work pieces.
SALIENT FEATURES
Can hold plunger as well as lever type dial indicator.
Guaranteed magnetic pull to permanent magnet.
Easy locking device to lock gauges.
With little leverage base can be taken over from iron surface.
SPECIFICATIONS:
Base 41 mm dia x 38 mm L
Column 12.5 mm dia x 180 mm L
Magnetic Pull 20 kg. (50 lbs)
SRD – 102
Specifications are same as SRD-100. But it is provided with Fine Attachment Screw for accurate final setting of the indicator dial. It has Magnetic Pull of 50 lbs.
ROUND MAGNETIC BASE STAND
This tool is useful for testing spindle run out of machine tools, lathe work etc. It is well adapted for inspection of the parallelism of surfaces. The indicator can be swiveled in all directions. The base is of steel and provided With T slots for convenience in clamping. The surfaces of the base are accurately ground. New clamping System ensures quicker rigid clamping even with moderate tightening. The holder for the Dial Indicator is equipped with fine adjustment device permitting vibration free adjustment to zero.
SPECIFICATIONS:
KM – 300
LENGTH OF BASE 250 mm
WIDTH OF BASE 50 mm
HEIGHT OF BASE 35 mm
HEIGHT OF COLUMN 225 mm
DIAMETER OF COLUMN 18 mm
DIAL INDICATOR STAND
These very heavy and robust stands are used whenever the highest measuring accuracy and an optimum rigidity is demanded. The extremely sturdy columns with the rigid base guarantee highest rigidity. This ensures simple and rapid setting of the stand and clamps and scriber in any position even at moderate tightening. A fine adjustment device allows rapid and easy setting at desired size. Suitable for pattern making.
SPECIFICATIONS:
KM - 904 KM – 905
LENGTH OF BASE 130 mm 160 mm
WIDTH OF BASE 105 mm 130 mm
HEIGHT OF BASE 35 mm 40 mm
RIGID COLUMN 600 mm 1000 mm
DIAMETER OF COLUMN 22 mm 25 mm
EXTRA HEAVY DUTY SURFACE GAUGE