HARDENED VEE BLOCKS | Pune ,India from SHREEPAD INDUSTRIES

Checking delivery availability...

SHREEPAD INDUSTRIES

Latest Search Tags

SHREEPAD INDUSTRIES

Preview

This is your website preview.

Currently it only shows your basic business info. Start adding relevant business details such as description, images and products or services to gain your customers attention by using Boost 360 android app / iOS App / web portal.

Home All Products (17) HARDENED VEE BLOCKS

HARDENED VEE BLOCKS SH- 455, SH- 456

These hardened vee blocks come with these special inbuilt features:
‘V’ blocks are hardened and ground to 60+2 HRC
Precision ‘V’ Blocks for Tool Room, Inspection Work, Assembly Shop, Marking
All sides precision ground, parallel and square
‘V’ groove ground central and parallel 2 sides and base perfect aligned in matched pair
Supplied with special clamp for holding job
Hold square and round work

SPECIFICATIONS:

Cat No. Size Range
SH- 455 [4”v-b] 175 * 100 * 65 mm 5-125 mm

HARDENED VEE BLOCKS

In Stock

Need More Info

Description

HARDENED VEE BLOCKS SH- 455, SH- 456 These hardened vee blocks come with these special inbuilt features: ‘V’ blocks are hardened and ground to 60+2 HRC Precision ‘V’ Blocks for Tool Room, Inspection Work, Assembly Shop, Marking All sides precision ground, parallel and square ‘V’ groove ground central and parallel 2 sides and base perfect aligned in matched pair Supplied with special clamp for holding job Hold square and round work SPECIFICATIONS: Cat No. Size Range SH- 455 [4”v-b] 175 * 100 * 65 mm 5-125 mm

Products Tags

Need More Info

2016-05-04T04:51:20

Keywords

mm sides ground Tool Room VEE BLOCKS SH special clamp Assembly Shop hardened vee blocks special inbuilt features Size Range

True

You might like these

ROLLER BEARING ‘V’ BLOCK Used for checking heavy and odd shaped round jobs. Perfectly matched pair having accuracy 0.005 mm Included angle of rollers is 90° Standard bearings are used which are replaceable Jobs don’t get damaged due to bearing on top SPECIFICATIONS: Cat No. Sizes mm. Range mm. Load Lx W x H Capacity Kg SH - 888 150 x 60 x 100 Æ3 - Æ 55 1,000 SPECIAL SIZES ARE AVAIBLE ON REQUEST

ROLLER BEARING ‘V’ BLOCK

MAGNETIC VICE KM - 730, KM - 739 The "Kumaun" Magnetic Vice ensures a distortion free use. This Vice assures the square holding of the component and thus the set up time is minimized. SPECIAL FEATURES: Flatness, Square ness, & Parallelism - 0.005 mm Permanent powerful magnet with ON – OFF switch All surfaces are precision ground Vertical 'v’ in movable jaw SPECIFICATIONS: CAT. NO. SIZE KM - 730 150 * 115 * 75 KM - 739 200 * 125 * 85

SRD – 97 Medium duty rectangular shape magnetic base with powerful magnetic pull and a quick release lever with ‘V ‘ shape at the bottom facilitate easy mounting on a machine tool or work surface. Exclusive fingertip release tilts unit away from work for easy removal. SPECIFICATIONS: BASE – 1.1 / 8” * 1.1 / 8” * 3. 3 / 4” COLUMN – 5 / 1 6” DIA 4” LENGTH MAGNETIC PULL – 30 KG Supplied with two rods, one to hold standard dial gauges and dial test indicators 1 / 4 “ in diameter and other multi step rod 1 / 4 “ dia with 5 / 6: O.D. at one end and 7 / 32 “ O.D. at the other end for use with standard machine shop clamps. SRD – 98 Similar to SRD – 97 but having Fine Adjustment to facilitate rapid setting of indicator dials at a desired position. SPECIAL BALL JOINT BASES: SRD – 97 B & SRD – 98 B Dimensions are same as SRD – 97 and SRD – 98. But the pillar is provided with Bolt and Socket Joint Action.

ALRGE MAGNETIC BASE

V- BLOCK HARDENED (UNIVERSAL) (with clamp)

KM – 401, KM – 402, KM – 403, KM – 404, KM – 405 Steel case hardened. Ends of jaws chamfered to facilitate clamping under shoulder or in recess. Clip holds loose jaw in position when clamp screw is released. SPECIFICATIONS: CAT.NO. LENGTH OF JAW OPENING 401 1.5” (38 mm) 5/8” (17 mm) 402 2” (51 mm) 1” (25 mm) 403 3” (75 mm) 1.5/8” (41 mm) 404 4” (102 mm) 2.5” (64 mm) 405 5” (127mm) 3.5” (89 mm)

TOOLMAKERS PARALLEL CLAMP

MRM – 700, MRM – 900 These blocks are designed to hold the steel components in desired fixed position during welding marking grinding etc. These are extremely useful in Tool – Room in the assembling of jigs and fixtures and are also utilized with Sine table for inspection of components. They are also used a magnetic parallels as the pair are matched with +/- 5 micron. In bigger sizes an ON – OFF switch is also provided. SPECIFICATIONS: TYPE SIZE MRM – 700 100 * 70 * 70 MM MRM - 900 150 * 80 * 80 MM The MRM – 700 H and MRM- 900 H are also available. These have the same specifications as the MRM 700 and the MM 900 but the additional lining of hardened steel plates ensures the extra wear resistibility

MAGNETIC SQUARE BLOCK

SRD – 95 Small bodied square in shape magnetic base with a “ V “ which permits use on round or flat therefore can easily be mounted on machine tools or work surfaces, with greater magnetic pull and quickly released by a simple leverage SPECIFICATIONS: BASE – 1.1/ 4” * 1.1 / 4 * 1.5 / 16” COLUMN – 5 /16” Dia * 4” Height MAGNETIC PULL - 25 kg (50 lbs.) Supplied with two rods namely, one for standard dial gauges and dial test indictors and other for standard. Machine shop clamps with a step of 5 / 16 “& 7 / 32 “at the ends. SRD – 96 Similar to SRD – 95 but it is having Fine Adjustment for rapid setting indicators to desired readings. SPECIAL BALL JOINT BASE: SRD – 95 & SRD – 96B Dimensions are same as SRD – 95 & SRD – 96. But the pillar is provided with Bolt & Socket Joint Action.

SMALL MAGNETIC BASE

This extra heavy and ruggedly made universal testing stand is used wherever the highest accuracy is required in using a comparator. It can be used in many different ways; on the surface plate in testing parallel surfaces of work pieces on machine tools for setting up pieces to be machined with reference to already existing surfaces or for inspecting mounted pieces for run-out etc. The surfaces of the H-formed base, the column and the extension arm are high precision ground. The column can be moved and clamped in any position of the base with a knurled nut. The extension arm, which can be adjusted in height moved lengthwise and swiveled is sufficiently rigid that vibrates during the measurement even with the fullest extension are at a minimum. The base of the indicator stand is made of steel or cast iron. SPECIFICATIONS: KM - 301 HEIGHT OF COLUMN 300 mm 500mm800m MAXIMUM HORIZONTAL EXTENSION 350 mm 350 mm 350 mm LENGTH OF BASE 300 mm 300 mm 300 mm WIDTH OF BASE 100 mm 100 mm 100 mm DIAMETER OF COLUMN 40 mm 40 mm 40 mm EXTENSION ARM 25 mm 25 mm 25 mm

HEAVY DUTY DIAL INDICATOR STAND

RH – AM RH – BH CH – CM DTH – M KJH – D RH – B CH – C DTH Rectangular Holder type AM 8 mm*4.8 mm pin diameter 4 mm. Rectangular Holder Type BM 13 mm*6mm, pin diameter 4 mm. Cylinder Holder Type CM 9.5 mm diameter, pin diameter 4 mm. Swivel Clamp with Dovetail Holder (Metric models) Bore diameter 4 – 9.5 mm. Knuckle Joint Holder (Dovetail). Rectangular Holder Type A 5 / 16 “ * 3 / 16,pin diameter 1 / 4 “ Cylindrical Holder Type C 3 / 8 “ diameter pin diameter 1 / 4 “. Swivel Clamp with Dovetail Holder (Inch models) Bore diameter 1/4–3/8 ”. COMPLETE SET SPECIFICATIONS CONSISTS OF Tool post holder 9.5 * 19 * 150 Upright spindle 8 dial * 115 L Universal Clamp 6.5 and 8 holes G – Clamp 33 capacity round or flat Extra contact points With Domed Anvil and Round Anvil Tommy bar. Hole attachment with indicator Mounting hole and swivel Arm 9.5 hole for dial indicator. TYPE READING TRAVEL GRADUATION 40 mm 787-1 0.001 mm 3.5 mm 0-50-0 Black 787-2 0.001 mm 3.5 mm 0-100 Plunger Type 787-3 0.001 inch 0.14 inch 0-25-0 Dial Gauges 787-4 0.001inch 0.14 inch 0-50

LEVER TYPE DIAL INDICATOR

ROLLER BEARING ‘V’ BLOCK Used for checking heavy and odd shaped round jobs. Perfectly matched pair having accuracy 0.005 mm Included angle of rollers is 90° Standard bearings are used which are replaceable Jobs don’t get damaged due to bearing on top SPECIFICATIONS: Cat No. Sizes mm. Range mm. Load Lx W x H Capacity Kg SH - 888 150 x 60 x 100 Æ3 - Æ 55 1,000 SPECIAL SIZES ARE AVAIBLE ON REQUEST

ROLLER BEARING ‘V’ BLOCK

MAGNETIC VICE KM - 730, KM - 739 The "Kumaun" Magnetic Vice ensures a distortion free use. This Vice assures the square holding of the component and thus the set up time is minimized. SPECIAL FEATURES: Flatness, Square ness, & Parallelism - 0.005 mm Permanent powerful magnet with ON – OFF switch All surfaces are precision ground Vertical 'v’ in movable jaw SPECIFICATIONS: CAT. NO. SIZE KM - 730 150 * 115 * 75 KM - 739 200 * 125 * 85

SRD – 97 Medium duty rectangular shape magnetic base with powerful magnetic pull and a quick release lever with ‘V ‘ shape at the bottom facilitate easy mounting on a machine tool or work surface. Exclusive fingertip release tilts unit away from work for easy removal. SPECIFICATIONS: BASE – 1.1 / 8” * 1.1 / 8” * 3. 3 / 4” COLUMN – 5 / 1 6” DIA 4” LENGTH MAGNETIC PULL – 30 KG Supplied with two rods, one to hold standard dial gauges and dial test indicators 1 / 4 “ in diameter and other multi step rod 1 / 4 “ dia with 5 / 6: O.D. at one end and 7 / 32 “ O.D. at the other end for use with standard machine shop clamps. SRD – 98 Similar to SRD – 97 but having Fine Adjustment to facilitate rapid setting of indicator dials at a desired position. SPECIAL BALL JOINT BASES: SRD – 97 B & SRD – 98 B Dimensions are same as SRD – 97 and SRD – 98. But the pillar is provided with Bolt and Socket Joint Action.

ALRGE MAGNETIC BASE

V- BLOCK HARDENED (UNIVERSAL) (with clamp)

KM – 401, KM – 402, KM – 403, KM – 404, KM – 405 Steel case hardened. Ends of jaws chamfered to facilitate clamping under shoulder or in recess. Clip holds loose jaw in position when clamp screw is released. SPECIFICATIONS: CAT.NO. LENGTH OF JAW OPENING 401 1.5” (38 mm) 5/8” (17 mm) 402 2” (51 mm) 1” (25 mm) 403 3” (75 mm) 1.5/8” (41 mm) 404 4” (102 mm) 2.5” (64 mm) 405 5” (127mm) 3.5” (89 mm)

TOOLMAKERS PARALLEL CLAMP

MRM – 700, MRM – 900 These blocks are designed to hold the steel components in desired fixed position during welding marking grinding etc. These are extremely useful in Tool – Room in the assembling of jigs and fixtures and are also utilized with Sine table for inspection of components. They are also used a magnetic parallels as the pair are matched with +/- 5 micron. In bigger sizes an ON – OFF switch is also provided. SPECIFICATIONS: TYPE SIZE MRM – 700 100 * 70 * 70 MM MRM - 900 150 * 80 * 80 MM The MRM – 700 H and MRM- 900 H are also available. These have the same specifications as the MRM 700 and the MM 900 but the additional lining of hardened steel plates ensures the extra wear resistibility

MAGNETIC SQUARE BLOCK

SRD – 95 Small bodied square in shape magnetic base with a “ V “ which permits use on round or flat therefore can easily be mounted on machine tools or work surfaces, with greater magnetic pull and quickly released by a simple leverage SPECIFICATIONS: BASE – 1.1/ 4” * 1.1 / 4 * 1.5 / 16” COLUMN – 5 /16” Dia * 4” Height MAGNETIC PULL - 25 kg (50 lbs.) Supplied with two rods namely, one for standard dial gauges and dial test indictors and other for standard. Machine shop clamps with a step of 5 / 16 “& 7 / 32 “at the ends. SRD – 96 Similar to SRD – 95 but it is having Fine Adjustment for rapid setting indicators to desired readings. SPECIAL BALL JOINT BASE: SRD – 95 & SRD – 96B Dimensions are same as SRD – 95 & SRD – 96. But the pillar is provided with Bolt & Socket Joint Action.

SMALL MAGNETIC BASE

This extra heavy and ruggedly made universal testing stand is used wherever the highest accuracy is required in using a comparator. It can be used in many different ways; on the surface plate in testing parallel surfaces of work pieces on machine tools for setting up pieces to be machined with reference to already existing surfaces or for inspecting mounted pieces for run-out etc. The surfaces of the H-formed base, the column and the extension arm are high precision ground. The column can be moved and clamped in any position of the base with a knurled nut. The extension arm, which can be adjusted in height moved lengthwise and swiveled is sufficiently rigid that vibrates during the measurement even with the fullest extension are at a minimum. The base of the indicator stand is made of steel or cast iron. SPECIFICATIONS: KM - 301 HEIGHT OF COLUMN 300 mm 500mm800m MAXIMUM HORIZONTAL EXTENSION 350 mm 350 mm 350 mm LENGTH OF BASE 300 mm 300 mm 300 mm WIDTH OF BASE 100 mm 100 mm 100 mm DIAMETER OF COLUMN 40 mm 40 mm 40 mm EXTENSION ARM 25 mm 25 mm 25 mm

HEAVY DUTY DIAL INDICATOR STAND

RH – AM RH – BH CH – CM DTH – M KJH – D RH – B CH – C DTH Rectangular Holder type AM 8 mm*4.8 mm pin diameter 4 mm. Rectangular Holder Type BM 13 mm*6mm, pin diameter 4 mm. Cylinder Holder Type CM 9.5 mm diameter, pin diameter 4 mm. Swivel Clamp with Dovetail Holder (Metric models) Bore diameter 4 – 9.5 mm. Knuckle Joint Holder (Dovetail). Rectangular Holder Type A 5 / 16 “ * 3 / 16,pin diameter 1 / 4 “ Cylindrical Holder Type C 3 / 8 “ diameter pin diameter 1 / 4 “. Swivel Clamp with Dovetail Holder (Inch models) Bore diameter 1/4–3/8 ”. COMPLETE SET SPECIFICATIONS CONSISTS OF Tool post holder 9.5 * 19 * 150 Upright spindle 8 dial * 115 L Universal Clamp 6.5 and 8 holes G – Clamp 33 capacity round or flat Extra contact points With Domed Anvil and Round Anvil Tommy bar. Hole attachment with indicator Mounting hole and swivel Arm 9.5 hole for dial indicator. TYPE READING TRAVEL GRADUATION 40 mm 787-1 0.001 mm 3.5 mm 0-50-0 Black 787-2 0.001 mm 3.5 mm 0-100 Plunger Type 787-3 0.001 inch 0.14 inch 0-25-0 Dial Gauges 787-4 0.001inch 0.14 inch 0-50

LEVER TYPE DIAL INDICATOR

HARDENED VEE BLOCKS SH- 455, SH- 456 These hardened vee blocks come with these special inbuilt features: ‘V’ blocks are hardened and ground to 60+2 HRC Precision ‘V’ Blocks for Tool Room, Inspection Work, Assembly Shop, Marking All sides precision ground, parallel and square ‘V’ groove ground central and parallel 2 sides and base perfect aligned in matched pair Supplied with special clamp for holding job Hold square and round work SPECIFICATIONS: Cat No. Size Range SH- 455 [4”v-b] 175 * 100 * 65 mm 5-125 mm

HARDENED VEE BLOCKS

View all in Products